HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 57 Error Codes — Part Code 6805 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WIf the same error occurs
despite retrying, call technical
support.
This error code is not
registered.
73106805
3ERetry the operation. If the
same problem persists despite
retrying, call technical
support.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
80016805
3ECall technical support.The configuration could not
be changed.
81106805
2ERetry the same operation
several times. If this problem
persists, call technical
support.
The subsystem status is
invalid. Call technical
support.
83106805
3EInstall necessary PCBs.Install necessary PCBs.86596805
3ECorrect the cache resource
number (CLPR No.), and then
retry the operation. If this
problem persists, call
technical support.
An invalid cache resource
number (CLPR No.) was
detected.
550096805
3ECorrect the storage resource
number (SLPR No.), and then
retry the operation. If this
problem persists, call
technical support.
An invalid storage resource
number (SLPR No.) was
detected.
550106805
3ESpecify the number of CLPRs
within the valid range.
The maximum number of
CLPRs that can be created
was exceeded.
552096805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Block Option setting is
incorrect.
552106805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Do not Block (Volume
Level) option setting is
incorrect.
552116805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The options Block Option and
Do not Block (Volume Level)
cannot be specified at the
same time.
552126805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Level 1 Threshold setting
is incorrect.
552136805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Level 2 Threshold setting
is incorrect.
552146805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Level 1 SIM setting is
incorrect.
552156805
XP Remote Web Console Error Codes 279