HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 56 Error Codes — Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the master journal
group number for the
specified data volume.
Change the journal group
number if you are performing
an Add Pair (Paircreate)
operation.
Delete the data volume from
the Preset list if you are
performing a Resume Pair
(Pairresync) operation.
The master journal group
number for the specified data
volume exceeds 0x0F.
591086610
5WCheck the CLPR number for
the specified data volume,
and specify only one CLPR
number.
There are two or more CLPR
numbers for the specified
data volume. In this
operation, specify only one
CLPR number.
591116610
5WSpecify only the volume that
has the same CLPR number
as the CLPR number of the
volume in the Preset list.
The CLPR number of the
specified data volume is
different from the CLPR
number of the data volume in
the Preset list. In this
operation, specify only one
CLPR number.
591126610
5WCheck the CLPR number of
the specified volume, and
check the CLPR numbers of
any existing volumes. Make
sure the journal group has
only one CLPR number while
specifying a volume.
There are two or more CLPR
numbers for the specified
volume, or you tried to
register a volume different
from the CLPR number of an
existing volume. Two or more
CLPR numbers cannot exist in
one journal group.
591136610
5WIf there are some presets,
check the number. If it is too
large, clear the presets by
selecting [Apply] and retry
the operation. If there is no
preset, too large number of
data is selected. Reduce the
number of data and retry the
operation.
The number of presets may
have exceeded the limit, or
too large number of data is
selected.
591156610
0WCheck the microcode version
of the DKCMAIN, and then
call technical support.
The specified function is not
supported by the current
microcode version.
591166610
0WCheck the microcode version
of the DKCMAIN, and then
call technical support.
The current microcode
version does not allow you to
change options for a journal
group in the Active status.
591196610
0WCheck the microcode version
of DKCMAIN. If you want use
other emulation types, call
technical support and update
the microcode version of
DKCMAIN.
The current microcode
version of DKCMAIN does
not support Add Pair
(Paircreate) operations,
Resume Pair operations, and
Change Pair Option
operations using the
emulation type of the
specified volume.
591506610
276 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes