HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 56 Error Codes — Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iSelect [OK].The monitoring was stopped
by another operator. The
graph will be closed.
91156610
0iSelect [OK].Another operator has
changed the Gathering
Interval value. The graph will
be closed.
91166610
0iTo close the graph, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
close the graph?
91176610
0iTo apply this setting, select
[OK]. To change the setting,
select [Cancel].
Check the specified value.91186610
0iSelect a graph item.No graph item has been
selected. Select a graph item.
91196610
0iTo execute the processing
and close the graph, select
[OK], Otherwise, select
[Cancel].
The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
91206610
0iTo execute this operation,
select [OK], Otherwise, select
[Cancel].
Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
91216610
0iTo output a snapshot file,
select [OK]. To cancel the
operation, select [Cancel].
Are you sure you want to
output pair status into a
snapshot file?
91226610
0iTo close the graphs, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
close all active graphs?
91276610
0iSelect [OK], and then specify
the correct volume.
The specified volume was not
found.
91286610
0iSelect [OK].The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
91556610
0WSelect [OK], and then specify
the correct volume.
There are no valid volumes.93036610
0WSet the port to Initiator before
registering the storage
system.
There are no initiator ports.93056610
5WObtain a license for Hitachi
Universal Replicator for
z/OS, and then install it.
The Hitachi Universal
Replicator for z/OS function
is not installed in this
controller. You cannot create
pairs.
93066610
XP Remote Web Console Error Codes 271