HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECorrect settings, and then
retry.
This LU cannot be combined
into or released from a LUSE
volume because it is not a
Read/Write enabled volume
that is also usable as an
S-VOL (secondary volume.)
11710003
6ECorrect settings, and then
retry.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
11720003
6ECorrect the settings, and then
retry.
Failed to set the host because
the number of hosts exceeds
the maximum that can be set
in a port.
11730003
6ECorrect the settings, and then
retry.
The specified host ID is
already registered.
11740003
6ECorrect the settings, and then
retry.
Fibre port settings cannot be
made to an iSCSI port.
11750003
6ECorrect the settings, and then
retry.
High-speed mode cannot be
set to iSCSI packages.
11760003
6ECorrect the settings, and then
retry.
The specified host is already
registered.
11770003
6ECorrect the settings, and then
retry.
An incorrect host name was
specified.
11780003
6ECorrect the settings, and then
retry.
A non-registered host was
specified.
11790003
2EIf this problem persists call
technical support.
An error occurred. If this
problem persists call technical
support.
11800003
6WCorrect the specification, and
then retry the operation.
The specified path cannot be
added, because the volume
is used by a XP Continuous
Access pair.
11810003
2EIf this problem persists call
technical support.
An error occurred. If this
problem persists call technical
support.
11820003
0WCorrect the port information
or the PCB mode information.
The port information is
inconsistent with PCB mode
information.
11840003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
You are trying to insert in the
linkage operation including
LUSE. (LDEV number is
inserted to the LDEV numbers
created in LUSE.)
11850003
XP Remote Web Console Error Codes 27