HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 56 Error Codes — Part Code 6610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify the data that you
want to register in the SVP.
Then retry the operation.
The displayed information
has not been changed.
50306610
0WCheck the contents, and retry.The Operation value is
invalid. Specify the correct
value.
51376610
0WCheck the contents, and retry.The value specified for
Gathering Interval is invalid.
Specify a valid value within
the range of 1 to 15.
51386610
0WSpecify the correct CU
number.
The specified CU number is
incorrect. Specify the correct
CU number.
51406610
0WSpecify the correct device
number.
The specified LDEV number
is incorrect. Specify the
correct LDEV number.
51416610
0WCheck the values, and then
specify correct values.
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
51446610
2ECall technical support.An error occurred in client
logic.
73016610
2ECall technical support.An error occurred in client
logic.
73026610
2ECall technical support.An error occurred in client
logic.
73036610
2EIf the same error occurs
despite retrying, call technical
support.
An error occurred during
processing. If this problem
persists, call technical
support.
74406610
5WSelect [Refresh], and retry.The system cannot apply the
new configuration. Do you
want to refresh?
81016610
5WCheck the port type, and then
change cable connections.
Exchange the channel cable
connections after
confirmation of the port type.
90066610
0WSelect [OK].SIMs of XP Continuous
Access Journal and Hitachi
Universal Replicator for z/OS
are cleared.
90086610
0iSelect [OK].Snapshot is complete.90096610
5WTo continue processing, select
[Yes]. If the processing
finishes, reconfigure the port
that is not in operation.
The Port Setting process has
not completed. Do you want
to continue for other ports?
90216610
5WEnsure that the associated
channel paths are offline.
Are you sure you want to
exchange the specified ports?
Confirm the associated
channel paths are off-line.
90246610
XP Remote Web Console Error Codes 269