HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the status of the
specified master journal
group.
You cannot specify [Entire] or
[None] to the Initial copy
mode under the current status
of the specified master
journal group. Check the
status of the specified master
journal group.
593276510
0WChange the status of the
mirror of the journal group to
Initial, and then retry the
operation.
The journal volume cannot be
deleted because the attribute
of the mirror for the journal
group is master and the status
of the mirror is Hold.
593286510
0WSelect the check box when
you add the journal group of
the local DKC to the extended
consistency group (EXCTG.)
The serial number of the local
DKC is entered. Select the
check box when you add the
journal group of the local
DKC to the extended
consistency group (EXCTG.)
593296510
0WDelete other DKC to use the
journal group of the local
DKC.
The local DKC cannot be
specified for the extended
consistency group (EXCTG.)
Delete other DKC to use the
journal group of the local
DKC.
593306510
0WCheck whether the specified
volume is a LUSE volume.
Also, check the version of the
microcode of the storage
system.
A LUSE volume is included in
the specified volumes.
The current version of the
microcode does not allow
you to create pairs using
LUSE volumes.
593316510
0WCheck the value of the path
watch time.
The value of the path watch
time is not entered or is
outside the range. Check the
value of the path watch time.
593356510
Table 55 Error Codes — Part Code 6605
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565246605
268 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes