HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WSpecify only the volume that
has the same CLPR number
as the CLPR number of the
volume in the Preset list.
The CLPR number of the
specified data volume is
different from the CLPR
number of the data volume in
the Preset list. In this
operation, specify only one
CLPR number.
591126510
5WCheck the CLPR number of
the specified volume, and
check the CLPR numbers of
any existing volumes. Specify
the volume so that there is
only one CLPR number in the
journal group.
There are two or more CLPR
numbers for the specified
volume, or you tried to
register a volume different
from the CLPR number of an
existing volume. Two or more
CLPR numbers cannot exist in
one journal group.
591136510
5WIf there are some presets,
check the number. If it is too
large, clear the presets by
selecting [Apply] and retry
the operation. If there is no
preset, too large number of
data is selected. Reduce the
number of data and retry the
operation.
The number of presets may
have exceeded the limit, or
too large number of data is
selected.
591156510
0WCheck the microcode version
of the DKCMAIN, and then
call technical support.
The specified function is not
supported by the current
microcode version.
591166510
0WCheck the microcode version
of the DKCMAIN, and then
call technical support.
The current microcode
version does not allow you to
change options for a journal
group in the Active status.
591196510
0WChange the status of the
mirror of the journal group to
Stop or Initial, and then retry
the operation.
The journal volume cannot be
deleted because the status of
the mirror of the journal
group is Active.
591536510
0WCheck the entered parameter.The entered parameter is
invalid.
The serial number, the
controller ID, or the journal
group to be added is not
specified.
593236510
0WCheck the status of the
specified master journal
group.
A pair which is ready for
Delta resync cannot be
created under the current
status of the specified master
journal group. Check the
status of the specified master
journal group.
593256510
0WSpecify a mirror ID other than
0.
Specify a mirror ID other than
0 if you create a pair ready
for Delta resync.
593266510
XP Remote Web Console Error Codes 267