HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WPurchase a license for XP
Continuous Access Journal,
and then install it.
You cannot add journal
volumes because XP
Continuous Access Journal is
not installed.
590396510
0WAll journal groups are used
by Hitachi Universal
Replicator for z/OS or XP
Continuous Access Journal. If
possible, delete journal
groups of Hitachi Universal
Replicator for z/OS or XP
Continuous Access Journal,
and then start the XP
Continuous Access Journal
window or the Hitachi
Universal Replicator for z/OS
window.
There are no valid journal
groups.
590426510
0WReduce the number of journal
volumes to be registered, or
increase the number of
journal volumes to be
deleted.
The number of journal
volumes in some journal
groups exceeds the
maximum. Adjust the number
of journal volumes.
590436510
0WUse the sort function to
identify volumes with the
same CU number and the
same LDEV number.
The same volume is stored
more than once in the Preset
list.
Use the sort function to
identify volumes with the
same CU number and the
same LDEV number.
591006510
0WCreate a volume that can be
used as a journal volume. To
do this, add a volume or use
some other way.
There is no volume that can
be registered or deleted.
591036510
0WSpecify another parity group.The specified parity group
does not contain volumes that
can be registered or deleted
as journal volumes.
591046510
5WCheck the master journal
group number for the
specified data volume.
Change the journal group
number if you are performing
an Add Pair (Paircreate)
operation.
Delete the data volume from
the Preset list if you are
performing a Resume Pair
(Pairresync) operation.
The master journal group
number for the specified data
volume exceeds 0x0F.
591086510
5WCheck the CLPR number for
the specified data volume,
and specify only one CLPR
number.
There are two or more CLPR
numbers for the specified
data volume. In this
operation, specify only one
CLPR number.
591116510
266 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes