HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the specified controller
ID.
The specified controller ID
cannot be used.
552026510
0WValue of “Threshold of start
Async JNL” must be equal to
or less than the value of
“Threshold of start Sync JNL.”
Some of the specified values
are incorrect. Two times the
value of M-JNL Cache plus
the value of R-JNL Cache must
be equal to or less than 100.
Or, the value of Threshold of
start Async JNL must be equal
to or less than the value of
Threshold of start Sync JNL.
552076510
0WSpecify the correct journal
group number.
The specified journal group
number is incorrect. Specify
the correct journal group
number.
552086510
0WSpecify normal deletion, or
specify Group as the range.
You want to forcibly delete
pairs, but there are some
pairs where Group is not
specified as the range.
Specify Group as the range
when you want to forcibly
delete pairs.
552296510
5WTo delete pairs, click Yes. If
not, click No.
WARNING! There are
some pairs where Group is
not specified as the range in
the pairs selected for
deletion.
Other pairs in the same
group may suspend due to a
failure by this operation.
556446510
0iRegister a journal group that
has the same CLPR number
as the specified volume, and
then retry the operation.
No journal group with the
same CLPR number as the
specified volume is
registered. Register a journal
group that has the same CLPR
number as the specified
volume, and then retry the
operation.
565046510
0iRegister secondary storage
systems, and then retry the
operation.
There are no secondary
subsystems available.
Register secondary
subsystems and then retry the
operation.
565056510
0iThere are no consistency
groups available. Create
unused consistency groups,
and then retry the operation.
There are no consistency
groups available. Create
unused consistency groups
and then retry the operation.
565226510
0iCheck the mirrors of the
specified volume.
No more mirrors can be
created for the specified
volume.
565236510
0iCheck the error information.An error occurred. Check the
error details.
590046510
0iSpecify the valid value.An invalid value is specified.590056510
264 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes