HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo switch the mode, select
OK. If not, select [Cancel.
Do you want to change the
mode?
91046510
0iTo discard the current settings
and exit the window, select
OK. If not, select Cancel.
The value that is under setup
is not reflected yet. Do you
want to exit?
91056510
0iTo discard the current settings
and switch to View mode,
select OK. If not, select
Cancel.
The value that is under setup
is not reflected yet. Do you
want to change the mode?
91066510
0iTo discard the current settings
and refresh the window,
select OK. If not, select
Cancel.
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
91076510
0WTo discard the current
settings, select OK. If not,
select Cancel.
Do you want to delete the
specified line of settings from
the Preset list?
91116510
0iTo continue the current
operation, select OK. If not,
select Cancel.
Do you want to continue this
operation?
91126510
0iSelect [OK].The monitoring was stopped
by another operator. The
graph will be closed.
91156510
0iSelect [OK].Another operator has
changed the Gathering
Interval value. The graph will
be closed.
91166510
0iTo close the graph, select
[OK]. If not select [Cancel].
Are you sure you want to
close the graph?
91176510
0iTo apply this setting, select
[OK]. To change the setting,
select [Cancel].
Check the specified value.91186510
0iSelect a graph item.No graph item has been
selected. Select a graph item.
91196510
0iTo execute the processing
and close the graph, select
[OK], If not, select [Cancel].
The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
91206510
0iTo execute this operation,
select [OK], If not, select
[Cancel].
Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
91216510
0iTo output a snapshot file,
select [OK]. To cancel the
operation, select [Cancel].
Are you sure you want to
output pair status into a
snapshot file?
91226510
0iTo close the graphs, select
[OK]. If not, select [Cancel].
Are you sure you want to
close all active graphs?
91276510
262 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes