HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 54 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ECall technical support.An error occurred in client
logic.
73016510
2ECall technical support.An error occurred in client
logic.
73026510
2ECall technical support.An error occurred in client
logic.
73036510
2EIf the same error occurs
despite retrying, call technical
support.
An error occurred during
processing. If this problem
persists, call technical
support.
74406510
5WSelect the Refresh button, and
retry.
The system cannot apply the
new configuration. Do you
want to refresh?
81016510
5WCheck the port type, and then
change cable connections.
Exchange the channel cable
connections after
confirmation of the port type.
90066510
0iSelect [OK].Snapshot is complete.90096510
5WTo continue processing, select
Yes. If the processing finishes,
reconfigure the port that is
not in operation.
The Port Setting process has
not completed. Do you want
to continue for other ports?
90216510
5WEnsure that the associated
channel paths are offline.
Are you sure you want to
exchange the specified ports?
Confirm the associated
channel paths are offline.
90246510
5WRemove XP Continuous
Access paths associated with
the ports.
Are you sure you want to
switch the ports? If the XP
Continuous Access paths exist
on the ports, delete them
beforehand.
90256510
5WTo continue to change ports,
select [OK].
Are you sure you want to
switch the ports?
If any XP Continuous Access
paths exist on the ports,
delete them beforehand.
Also, to avoid the switching
operation from being
reported as a failure, confirm
first that a message
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
90266510
0iTo exit the window, select
OK. If not, select Cancel.
Do you want to exit?91006510
0iTo cancel the operation,
select OK.
Do you want to cancel?91016510
0iTo apply settings in Preset to
the disk storage system, select
OK.
Do you want to apply?91026510
XP Remote Web Console Error Codes 261