HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ERelease the Port Group
setting.
Because the Port Group
setting is done, it is
impossible to change.
Release the Port Group
setting.
11400003
2ELog in again after a while.Processing in progress. Wait
for a while, and then retry the
operation.
11410003
6ECheck the setting and then
retry changing the
configuration.
You are trying to change the
Fibre address, the topology,
the channel speed, the
security switch, and the port
attribute (Initiator or Target)
of a NAS port. Check the
setting.
11450003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11460003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11470003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11480003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11490003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11500003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists call technical
support.
11510003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists call technical support.
11540003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists call technical support.
11560003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists call technical support.
11590003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists call technical support.
11690003
6ECorrect settings, and then
retry.
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
11700003
26 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes