HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the specified JNL
Control parameter.
Invalid parameter (Journal
Control.)
580686505
0iCheck the specified Suspend
Condition parameter.
Invalid parameter (Suspend
Condition-Journal Full.)
580696505
0iCheck the specified Suspend
Condition parameter.
Invalid parameter (Suspend
Condition-Master Journal
Failure.)
580706505
0iCheck the specified Suspend
Condition parameter.
Invalid parameter (Suspend
Condition-Restore Journal
Failure.)
580716505
4WThe current configuration of
the storage systems and the
current status of lines
connecting the storage
systems may not satisfy the
operating conditions. Check
the configuration of the
storage systems and the
status of lines connecting the
storage systems, and then
check whether the status of
the Continuous Access pair
is changed.
The pair status has not
changed yet. Check the
configuration of the
subsystems and the status of
lines connecting the
subsystems, and then check
whether the status of the
Continuous Access pair is
changed.
580726505
0WIf the same error occurs
despite retrying, call technical
support.
The subsystem is busy. Wait
for a while, and then retry the
operation.
580736505
0iCheck the specified serial
number.
The specified serial number
is incorrect.
580756505
0iCheck the status of the
specified volume.
The specified volume does
not exist or is unusable.
580786505
0iCheck the status of the
specified primary data
volume in the Volume
Retention window or the XP
LUN Security Extension
Software window.
The specified primary data
volume cannot be used as an
S-VOL (secondary volume)
because of Volume Retention
settings or XP LUN Security
Extension Software settings.
580796505
0iCheck the status of the
specified primary data
volume.
A Concurrent Copy operation
is in progress on the specified
primary data volume.
580806505
0iCheck the status of the
specified volume in the
Volume Security window.
The specified primary data
volume belongs to an access
group or a pool group of
Volume Security.
580816505
0iSpecify an unused
consistency group number.
The specified consistency
group is being used.
580826505
0iCheck the status of the
specified primary journal
group.
The specified primary journal
group is not registered.
580836505
XP Remote Web Console Error Codes 233