HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECheck whether the primary
storage system supports XP
Continuous Access via serial
interface. Install the
microcode that supports XP
Continuous Access via serial
interface, or execute XP
Continuous Access via fibre
interface.
The primary subsystem does
not support XP Continuous
Access via serial interface.
89226505
4EDelete the logical paths on
the specified port and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89246505
4WCheck the port type of the
specified port and retry the
operation.
Invalid port type.89296505
4EDelete the logical paths on
the specified port and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89306505
4EDelete the logical paths on
the specified port and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89316505
0WCheck the configuration of
the specified primary data
volume.
The Paircreate (Add Pair)
operation failed because the
specified primary data
volume is the NAS system
volume.
89326505
0WCheck the configuration of
the specified secondary data
volume.
The Add Pair (Paircreate)
operation failed because the
specified secondary data
volume was a NAS system
volume.
89346505
0WCheck the configuration of
the specified primary data
volume.
The Add Pair (Paircreate)
operation failed because the
specified primary data
volume was a NAS volume.
89356505
0WCheck the microcode version
of the secondary storage
system.
The Paircreate (Add Pair)
operation failed. The
microcode version of the
specified secondary
subsystem does not support
Continuous Access with NAS
volumes.
89366505
4iCheck the access attribute of
the specified secondary data
volume.
The specified secondary data
volume is unusable because
of the access attribute
changed by XP LUN Security
Extension Software.
89446505
4iCancel the definition of the
external volume and retry the
operation.
The external volume that is
mapped to an internal
volume is connected to the
port.
89476505
4iStop I/O operations, and
retry.
The specified port is receiving
I/O requests.
89486505
XP Remote Web Console Error Codes 229