HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4WCheck the status of the
secondary data volume.
The specified secondary data
volume must not be:
• in an
intervention-requested
condition
• in a protected condition
• in an unusable condition
• an XP Business Copy
S-VOL or a Hitachi
ShadowImage for z/OS
T-VOL
• a volume reserved by XP
Business Copy or Hitachi
ShadowImage for z/OS
• a volume used by XP Auto
LUN
• an XP Business Copy
P-VOL in Swap or Reverse
Copy status
• a Hitachi ShadowImage
for z/OS S-VOL in Swap
or Reverse Copy status
88196505
4ECheck the SSB log, and then
call technical support.
An I/O error occurred on the
secondary data volume.
88226505
4iVolumes reserved by XP Auto
LUN cannot be specified as
primary data volumes. Check
the status of the specified
primary data volume from the
host or the SVP.
The specified primary data
volume is already reserved
by XP Auto LUN.
88306505
4iVolumes reserved by XP Auto
LUN cannot be specified as
secondary data volumes.
Check the status of the
specified secondary data
volume from the host or the
SVP.
The specified secondary data
volume is already reserved
by XP Auto LUN.
88316505
4iWait a few minutes and retry
the operation.
Wait a few minutes and then
retry the operation.
88326505
4iWait for a few minutes and
retry the operation.
Wait a few minutes and then
retry the operation.
88336505
4ESee license key information
and check the licensed
volume capacity. To create
more pairs, purchase a
license key for using larger
capacity.
The Add Pair (Paircreate)
operation failed because you
tried to create volume pairs
which exceeded the licensed
capacity.
88346505
XP Remote Web Console Error Codes 227