HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iCheck the status of the
primary data volume from the
host or the SVP.
The operation failed because
the specified primary data
volume was used by XP
Business Copy or Hitachi
ShadowImage for z/OS and
satisfied one of the following
conditions:
• The volume was an XP
Business Copy S-VOL in
non-PSUS status.
• The volume was a Hitachi
ShadowImage for z/OS
T-VOL in non-Split status.
• The volume was a
reserved volume.
• The volume was in the
Reverse Copy status.
87956505
4iCheck the status of the
secondary data volume from
the host or the SVP.
The secondary data volume
must not be:
• S-VOL or reserve volume
for XP Business Copy.
• T-VOL or reserve volume
for Hitachi ShadowImage
for z/OS.
• T-VOL or reserve volume
for XP FlashCopy Mirror.
• XP Business Copy volume
in the Reverse Copy
status.
• Hitachi ShadowImage for
z/OS volume in the
Reverse Copy status.
• XP FlashCopy Mirror
volume in the Reverse
Copy status
87966505
226 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes