HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iXP Continuous Access Journal
or Hitachi Universal
Replicator for z/OS must be
installed in the storage system
when you create a path or a
pair for XP Continuous
Access Journal or Hitachi
Universal Replicator for
z/OS. Install XP Continuous
Access Journal or Hitachi
Universal Replicator for z/OS
in the storage system.
XP Continuous Access Journal
or Hitachi Universal
Replicator for z/OS is not
installed in the subsystem.
87336505
4iXP Continuous Access Journal
or Hitachi Universal
Replicator for z/OS must be
installed in the remote
storage system when you
create a path or a pair for XP
Continuous Access Journal or
Hitachi Universal Replicator
for z/OS. Install XP
Continuous Access Journal or
Hitachi Universal Replicator
for z/OS in the remote
storage system.
XP Continuous Access Journal
or Hitachi Universal
Replicator for z/OS is not
installed in the remote
subsystem.
87346505
4ECheck the serial number and
the controller ID of this remote
storage system and already
registered remote storage
systems, and then specify the
correct values.
If the specified values are
correct, check the cable
connection of the remote
storage system. If the problem
persists, call technical
support.
The serial number or the
controller ID of the remote
subsystem is incorrect.
87356505
0WDelete data volume pairs of
the specified remote storage
system. After that, delete
journal groups, if any. Ensure
that there are no data volume
pairs and journal groups,
and then retry the operation.
The specified remote
subsystem contains journal
groups or data volume pairs
for XP Continuous Access
operations.
87366505
4ECheck the SSB log, and then
call technical support.
An internal error occurred.87376505
4WCheck the status of the
pinned tracks in the primary
data volume, and clear the
pinned tracks.
Pinned track(s) exists in the
primary data volume.
87426505
4WCheck the status of the
pinned tracks in the
secondary data volume, and
clear the pinned tracks.
Pinned track(s) exists in the
secondary data volume.
87436505
XP Remote Web Console Error Codes 223