HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)
Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECheck the path connections
between the local and the
remote storage systems, and
then retry the operation.
Path creation failed.87226505
4iAdd another path, or delete
all pairs on the remote
storage system. After that,
retry the operation.
The Edit Path operation was
rejected because the
specified path is the last path
of some Continuous Access
pairs.
87236505
4iCheck the number of paths.The specified number of
paths is less than the
minimum number specified in
the DKC Option window.
87246505
4iDo either of the following to
recover from the error:
• If the error code is 100c,
add normal paths, and
then set the minimum
number of paths.
• If the error code is 100d,
add normal paths, and
then delete paths.
Alternatively, reduce the
minimum number of paths,
and then delete paths.
The number of minimum
paths exceeds the number of
normal paths.
87276505
4iDo either of the following to
recover from the error:
• If the error code is 100c,
add normal paths, and
then set the minimum
number of paths.
• If the error code is 100d,
add normal paths, and
then delete paths.
Alternatively, reduce the
minimum number of paths,
and then delete paths.
The number of minimum
paths exceeds the number of
normal paths.
87286505
4ECheck the SSB log, and then
call technical support.
An internal error occurred.87296505
4iDo either of the following to
recover from the error:
• If you are adding DKCs,
specify the same logical
address.
• If you are editing paths,
specify the same logical
address as the existing
paths.
The specified logical address
is incorrect.
87306505
4iDelete the DKC once, and
then add the DKC using the
same logical address.
The existing logical addresses
are not the same.
87316505
222 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes