HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 52 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iRefresh the window, and then
check the pair status. If
possible, retry the operation
on the secondary data
volume.
The pair status of the
secondary data volume is
incorrect.
87086505
4EReplace the channel adapter,
and then retry the operation.
Continuous Access operation
was rejected.
87096505
0WRefresh the window and
check the pair status of the
pair. If the pair status can be
manipulated, retry the
operation.
The pair status of the
specified data volume is
incorrect.
87106505
4iCheck the port number, ID,
and LUN of the storage
system.
The specified parameter is
incorrect.
87116505
4EIf you are performing a path
operation, retry the operation
after the FREEZE status is
released.
If you are performing a pair
operation, check the DKC
status, wait until the SCP time
elapses, and then retry the
operation.
The operation was rejected
due to a FREEZE state.
87126505
4EExchange the port type after
deleting the group setting.
The port group already exists
on the specified port.
87136505
4ECall technical support.An internal error occurred.87146505
4EEnsure that the number of
paths is correct, and then
retry the operation. If the
problem persists, call
technical support.
The number of paths is
incorrect.
87156505
4ECheck the serial number and
the controller ID of this remote
storage system and already
registered remote storage
systems, and then specify the
correct values.
If the specified values are
correct, check the cable
connection of the remote
storage system. If the problem
persists, call technical
support.
The serial number or the
controller ID of the remote
subsystem is incorrect.
87196505
4iReduce the number of
registered remote storage
systems, and then retry the
operation.
The number of registered
remote subsystems already
reached the maximum (that
is, 64.)
87206505
4ECheck the path connections
between the local and the
remote storage systems, and
then retry the operation.
Path creation has not finished
yet.
87216505
XP Remote Web Console Error Codes 221