HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 50 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WTo cancel the change
operation of the option
parameter, select OK. If you
don't want to cancel the
change operation, select
Cancel.
Are you sure you want to
cancel the change operation
of the option parameter that
you specified?
590016010
0iTo download the file, select
[Yes]. Otherwise, select [No].
Are you sure you want to
download the %s file?
590116010
0iSelect the OK button.The %s file does not exist.590126010
0WTo overwrite the file, select
[Yes]. If you do not want to
overwrite the file, select [No].
The specified file already
exists. Do you want to
overwrite this file?
590136010
0WCheck the CT group or the
Range of the specified
pair(s), and if necessary,
select the pair(s) again.
You cannot specify two or
more pairs in the same CT
group, if Group is selected
as the Range of these pairs.
Only one pair is displayed in
the Preset list.
590256010
0WCheck the RCU parameter
settings.
The specified RCU has been
already set. Check the RCU
parameter settings.
590266010
5iTo continue the operation,
select [OK]. To cancel the
operation, select [Cancel].
Note that the current
monitoring data will be
deleted if you change the
setting of monitoring switch.
If necessary, use Export Tool
of XP Auto LUN Base Monitor
to export the monitoring data
file.
The monitoring data saved at
present will be deleted.
590306010
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Note that the monitoring data
saved at present will be
deleted when you change the
setting of the monitoring
switch. If necessary, save the
monitoring data by using the
Export Tool.
The monitoring data saved at
present will be deleted when
the monitoring switch is set to
Enable the next time.
590316010
0WTo continue the operation,
click [OK]. Otherwise, click
[Cancel].
WARNING! This operation
deletes all command devices
for the Business Continuity
Manager. When command
devices are deleted, the host
I/O processing might be shut
down. Are you sure to
continue this operation?
593406010
218 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes