HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 50 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ESelect [OK]. Then contact
maintenance staff.
Snapshot has failed.93226010
0iSelect [OK].Snapshot has been canceled.93236010
0WTry again after the script
ends.
The specified operation is
prohibited while the script is
running.
93246010
0iSelect [OK].The script is terminated
forcibly.
93256010
0WSelect the Refresh button to
update the history file. If this
problem persists, call
technical support.
The monitoring time is over,
but the history file is not fully
updated yet.
93276010
0iSelect the OK button, and
then continue the operation.
This operation is not applied
yet.
93326010
0iThe requested operation has
started. Select the OK button
to close the dialog.
The requested operation has
started.
93376010
5WCheck the specified values
and retry the operation.
The specified value exceeds
the range. Alternatively, the
relationship between the
specified values is not
appropriate.
93606010
4WSelect Add RCU command,
and then register a DKC
path.
If you plan to create a pair
with the specified LUSE
volumes, a DKC path is
required.
550356010
0WFind the CUs that can be
used by the storage system
specified by Controller ID.
The subsystem specified by
Controller ID is not available
for the particular CU selected
from the tree.
552026010
0WFind the ports that can be
used by the storage system
specified by Controller ID,
and set them as initiator
ports.
There are no initiator ports
that can be used by the
subsystem specified by
Controller ID.
552036010
0WCheck the settings of the
specified RCU, M-VOL and
R-VOL.
The M-VOL or R-VOL is not
supported by the specified
RCU.
552046010
0WRegister the consistency
groups, and then retry the
operation.
There are no consistency
groups available for the CLPR
of the specified volumes.
Register the consistency
groups and then retry the
operation.
565376010
0WCheck the DKCMAIN
microcode version by the
Maintenance window of SVP.
Data Migration function is not
supported. Confirm the
DKCMAIN microcode
version.
565396010
0WCheck the size of the file,
decrease the size and retry
the operation.
The size of the specified file
exceeds 8 megabytes, so the
file cannot be uploaded.
565406010
XP Remote Web Console Error Codes 217