HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 50 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WThe same as the messageWARNING: Group or C/T
is specified for Delete Range.
Confirm all pairs in the group
are synchronized. If some
volumes are not
synchronized, full volume
initializations are required
before re-using them.
93046010
0WSet the port to Initiator before
registering RCU.
There are no initiator ports.93056010
0WThere is no Continuous
Access license. Set the
license.
The Continuous Access
function is not installed in this
controller. You cannot create
pairs.
93066010
0WSince the same volume where
multiple paths are defined
was selected, the overlapped
one was eliminated. Press the
OK button and continue.
You specified the same
volumes more than once. The
duplicate occurrences were
excluded.
93076010
0WSince there were overlapped
paths in the added paths, the
overlapped ones were
eliminated. Press the OK
button and continue.
You set the same path more
than once. The duplicate
paths are excluded.
93086010
0WSince all the added paths
overlapped, the operation of
adding paths cannot be
executed. Press the OK button
and continue.
All paths which you set have
already been registered. This
operation will terminate
because there is no path
which can be added.
93096010
0WSince there were overlapped
SSIDs in the added SSIDs, the
overlapped ones were
eliminated. Press the OK
button and continue.
You set the same SSID more
than once. Duplicate SSIDs
are excluded.
93106010
0WSince all the added SSIDs are
overlapped, the operation of
adding SSIDs cannot be
executed. Press the OK button
and continue.
All SSIDs which you set have
already been registered. This
operation will terminate
because there is no SSID
which can be added.
93116010
0WThe same as the message.Through this operation,
M-VOL status will be changed
to Simplex mode even if the
M-VOL is online to the host.
93166010
0WThe same as the message.The destination volume of the
specified volume pair may
contain some inconsistency
because volume copy is not
completed yet. Full volume
initialization is required
before re-using it.
93176010
0WTo delete the pair, even
though you cannot re-execute
the R-VOL deletion, select
OK. If not, select Cancel.
As a result of this operation,
you will not be able to re-start
ERASE R-VOL operation.
93186010
216 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes