HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 50 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo output pair status into a
snapshot file, select [OK]. To
cancel this operation, select
[Cancel].
Are you sure you want to
output pair status to a
snapshot file?
91226010
0iTo continue the operation,
select [OK]. To cancel the
operation, select [Cancel].
This process may take up to
%d minutes. Do you want to
continue?
91246010
0WTo stop the operation, select
[OK]. To continue the
operation, select [Cancel].
Are you sure you want to
stop this snapshot operation?
91256010
0WTo terminate the script, select
[OK]. Otherwise, select
[Cancel].
The script is running now.
Are you sure you want to
terminate the script?
91266010
0iTo close the graphs, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
close all active graphs?
91276010
0iSelect [OK], and then specify
the correct volume.
The specified volume was not
found.
91286010
0iSelect the OK button to
continue processing.
Recovered from the error that
occurred when copying
started.
91296010
0WThe same as the messageAs a result of this operation,
you will not be able to re-start
ERASE R-VOL operation. To
delete the pair forcibly, try
again with Force option.
91546010
0iSelect the OK button.The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
91556010
0WThe same as the messageWARNING: Destination
volume of specified volume
pair may contain some
inconsistency, because
volume copy is not completed
yet. Full volume initialization
is required before re-using it.
93006010
0WThe same as the messageWARNING: Through this
operation, M-VOL status will
be changed to SMPL status
forcibly, but R-VOL status will
not be changed. If you do
this operation, change the
R-VOL status to SMPL later.
93016010
0WSet the port to RCP before
registering RCU. Moreover,
set up the correct range of
CU numbers to which the RCP
port is applied.
There are no RCP ports.93026010
0WThere is no valid volume.
Check the device emulation
and the definition of the SCSI
path (for Continuous Access.)
There are no valid volumes.93036010
XP Remote Web Console Error Codes 215