HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 50 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo close the window, select
[OK]. To not close the
window, select [Cancel].
The value that is under setup
is not reflected yet. Do you
want to exit?
91056010
0iTo change the mode, select
[OK]. To not change the
mode, select [Cancel].
The value that is under setup
is not reflected yet. Do you
want to change the mode?
91066010
0iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
91076010
0WTo delete the specified line of
settings from the Preset list,
select [OK]. Otherwise, select
[Cancel].
Do you want to delete the
specified line of settings from
the Preset list?
91116010
0iTo continue the current
operation, select [OK].
Otherwise, select [Cancel].
Do you want to continue this
operation?
91126010
0WTo clear the Continuous
Access related SIM, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
clear SIMs of Continuous
Access?
91136010
0iTo continue the process,
select [OK]. Otherwise, select
[Cancel].
The value has been changed.
Do you want to continue the
operation?
91146010
0iSelect [OK].The monitoring was stopped
by another operator. The
graph will be closed.
91156010
0iSelect [OK].Another operator has
changed the Gathering
Interval value. The graph will
be closed.
91166010
0iTo close the graph, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
close the graph?
91176010
0iTo apply this setting, select
[OK]. To change the setting,
select [Cancel].
Check the specified value.91186010
0iSelect a graph item.No graph item has been
selected. Select a graph item.
91196010
0iTo execute the processing
and close the graph, select
[OK], Otherwise, select
[Cancel].
The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
91206010
0iTo execute this operation,
select [OK], Otherwise, select
[Cancel].
Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
91216010
214 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes