HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5iUse another volume, or
recreate the XP Continuous
Access Journal pair or the
Hitachi Universal Replicator
for z/OS pair using a mirror
ID other than 0. After that,
retry the operation.
The specified M-VOL is
already used as a primary
data volume for XP
Continuous Access Journal or
Hitachi Universal Replicator
for z/OS. To use the M-VOL
in conjunction with one of
these program products,
recreate the XP Continuous
Access Journal pair or the
Hitachi Universal Replicator
for z/OS pair using a mirror
ID other than 0, and retry the
operation.
584606005
5iSpecify another volume.A pair cannot be created
because the specified M-VOL
is being used by XP
Snapshot.
584946005
5iSpecify another volume.A pair cannot be created
because the specified R-VOL
is being used by XP
Snapshot.
584956005
5iSpecify another volume.A pair cannot be created
because the specified M-VOL
is a virtual volume.
584966005
5iSpecify another volume.A pair cannot be created
because the specified R-VOL
is a virtual volume.
584976005
5iSpecify another volume.A pair cannot be created
because the specified M-VOL
is being used as a pool
volume.
584986005
5iSpecify another volume.A pair cannot be created
because the specified R-VOL
is being used as a pool
volume.
584996005
5iWait for a while, and then
retry the operation.
A communication time-out
error occurred between MCU
and RCU. Wait for a while,
and then retry the operation.
585096005
5iSee the chapter on checking
the amount of copy in the
Data Migration operation
manual.
An inconsistency was
detected by checking the
amount of copy of migration
data. See the chapter on
checking the amount of copy
in the Data Migration
operation manual.
585156005
5iSee the chapter on checking
the amount of copy in the
Data Migration operation
manual.
An inconsistency was
detected by checking the
amount of copy of migration
data. See the chapter on
checking the amount of copy
in the Data Migration
operation manual.
585166005
XP Remote Web Console Error Codes 207