HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iRelease the setting of the
external volume, and retry the
operation.
The external volume that is
mapped to an internal
volume is connected to the
port.
89476005
4iStop I/O operations, and
retry.
The specified port is receiving
I/O requests.
89486005
4ECall technical support.An internal error occurred.89496005
4ECall technical support.An internal error occurred.89506005
4iCheck the status of the
specified M-VOL.
Failed to create a pair,
because the specified M-VOL
is used for XP Flex Copy.
89726005
4iCheck the status of the
specified R-VOL.
The operation failed because
the specified R-VOL was used
for XP Flex Copy.
89736005
4iCheck the status of the
specified M-VOL.
Failed to create a pair,
because the specified M-VOL
is path-defined from the iSCSI
port.
89746005
4iCheck the status of the
specified R-VOL.
Failed to create a pair,
because the specified R-VOL
is path-defined from the iSCSI
port.
89756005
4iCheck the status of the
specified M-VOL.
A pair cannot be created,
because the specified M-VOL
is an external volume.
89766005
4iCheck the status of the
specified R-VOL.
A pair cannot be created,
because the specified R-VOL
is an external volume.
89776005
4iConfirm the licensed capacity
Volume Retention Manager
on the RCU side. To execute
this operation, purchase a
license key that allows you to
use a larger capacity.
The operation failed because
the licensed capacity of
Volume Retention Manager
on the RCU side was
exceeded.
89806005
4iSpecify the volume that can
be used to create a pair, and
then retry the operation.
You cannot create a pair,
because the specified M-VOL
is a command device.
89826005
4iSpecify the volume that can
be used to create a pair, and
then retry the operation.
You cannot create a pair,
because the specified R-VOL
is a command device.
89836005
4iCheck the settings, and then
retry the operation.
You cannot create a new
pair, because the number of
CT groups of asynchronous
pairs that you can register in
SLPR exceeds the limit.
89846005
4iCheck the settings, and then
retry the operation.
The coexistence of volumes
that are in the different CLPRs
is not allowed within one CT
group.
89856005
204 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes