HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iAdd another path, or delete
all pairs on the RCU. Then
retry the operation.
Pending data exists on the
port.
88986005
4ECall technical support.An internal error occurred.88996005
4ECall technical support.An error occurred during the
port change.
89006005
4ECall technical support.An error occurred during the
port change.
89016005
4ECall technical support.An error occurred during the
port change.
89026005
4EThe XP Remote Control
computer detected an
unknown error code. Call
technical support.
Unknown Error Code.89036005
5EIf the extended shared
memory (SM #2) is not
installed in MCU, install the
shared memory to MCU
according to the installation
instruction of the extended
shared memory for XP
Continuous Access (Shared
Memory Size Configuration
dialog box), and then create
a pair.
If SM #2 is installed in MCU,
you cannot create any more
pairs because the number of
pairs has already reached
the maximum that can be
created by the system.
No more space is left in MCU
for differential management.
89046005
5EInstall the shared memory to
the MCU with the installation
instruction of expansion SM
for XP Continuous Access
(Shared Memory Size
Configuration.)
The extended SM is not
equipped in MCU.
89056005
5EIf the extended shared
memory (SM #2) is not
installed in RCU, install the
shared memory to RCU
according to the installation
instruction of the extended
shared memory for XP
Continuous Access (Shared
Memory Size Configuration
dialog box), and then create
a pair.
If SM #2 is installed in RCU,
you cannot create any more
pairs because the number of
pairs has already reached
the maximum that can be
created by the system.
No more space is left in RCU
for differential management.
89066005
200 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes