HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10310003
6ESet the extent area within the
size which can be specified,
and then retry the operation.
The specified extent is over
the size which can be
specified.
10320003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10330003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10340003
2EIf this problem persists, call
technical support.
The SSIDs are not defined.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10350003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10360003
2EThere is no capacity left in
the logical parity group to
create CV. The error does not
occur normally because it is
guarded in the screen.
Contact the program maker.
The free space remaining in
the parity group is not
enough to install a
customized volume (CV.)
10370003
2EThe specified emulation type
of CV cannot coexist. The
error does not occur normally
because it is guarded in the
screen. Contact the program
maker.
The specified emulation type
of the customized volume
(CV) is a type that cannot be
combined.
10380003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10390003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10400003
6ECheck and correct the
settings. If Volume Initialize
and Make Volume are
specified at the same time,
operate them separately.
The CU number and the LDEV
number set in the VLL
operation are the same as
those of other volumes.
10410003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10420003
20 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes