HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECall technical support.An internal error occurred.88266005
4iRetry the operation in a few
minutes.
If this problem persists, select
the volumes where the error
occurred, execute the Delete
Pair (Pairsplit-S) command
with the Force option, and
then retry the operation.
Wait a few minutes and retry
the Add Pair
(Paircreate)/Resume Pair
(Pairresync.)
88276005
4iConfirm the path type
specified for the Paircreate
operation on the RCU Status
screen.
This version of the microcode
does not support combining
pairs using Fibre paths, with
pairs using Serial paths in the
same DKC subsystem.
88286005
4ETake the following actions:
1. Specify only one CU# for
the same LCP of the RCU.
2. Connect to the LCP that
can access the specified
R-VOL.
The LCP of the RCU cannot
access the specified R-VOL.
88296005
4iCheck the status of the
specified M-VOL (P-VOL) from
HOST or SVP.
The specified M-VOL is
already used as a reserved
volume of XP Auto LUN.
88306005
4iCheck the status of the
specified R-VOL (S-VOL) from
HOST or SVP.
The specified R-VOL is
already used as a reserved
volume of XP Auto LUN.
88316005
4iCheck the status of the
specified M-VOL (P-VOL), and
then retry the Add Pair
(Paircreate) / Resume Pair
(Pairresync) operation in a
few minutes.
Wait a few minutes and retry
the Add Pair (Paircreate) /
Resume Pair (Pairresync)
operation.
88326005
4iCheck the status of the
specified R-VOL (S-VOL), and
then retry the Add Pair
(Paircreate) / Resume Pair
(Pairresync) operation in a
few minutes.
Wait a few minutes and retry
the Add Pair (Paircreate) /
Resume Pair (Pairresync)
operation.
88336005
4ESee the license key and
confirm the licensed capacity
of the volumes. To create
more pairs, purchase a
license key that allows you to
use a larger capacity.
The Add Pair (Paircreate)
operation failed because you
tried to create volume pairs
which exceeded the licensed
capacity.
88346005
4ESee the license key of the
RCU side, and confirm the
licensed capacity of the
volumes. To create more
pairs, purchase a license key
that allows you to use a
larger capacity.
The Add Pair (Paircreate)
operation failed because you
tried to create volume pairs
which exceeded the licensed
capacity of the RCU side.
88356005
4iCheck the pair status and
retry.
No additional volume pairs
waiting for copy.
88366005
194 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes