HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iCancel the preset suspension
in the CT group, and then
retry the operation.
Preset Suspension is effective
in the CT Group.
88176005
4iCancel the preset suspension
in the CT group, and then
retry the operation.
Preset Suspension is effective
in the CT Group.
88186005
4WSelect another volume.A volume cannot be used as
an R-VOL when:
• it is in an
intervention-required
condition.
• it is in a protection
condition.
• it is in unusable condition.
• it is a secondary volume
of XP Business Copy or a
target volume of Hitachi
ShadowImage for z/OS.
• it is a reserved volume of
XP Business Copy or
Hitachi ShadowImage for
z/OS.
• it is a volume reserved by
XP Auto LUN.
• it is used by Hitachi
Universal Replicator for
z/OS.
88196005
4WThe Continuous Access
operation failed, because
R-VOL has one of the
following conditions:
1. The volume is blocked.
2. The volume is under
maintenance.
3. The volume is copying
data (correction copy or
drive copy)
4. The volume is in the
correction access
condition.
The specified R-VOL is not a
permissible condition of
Continuous Access.
88206005
4WVerify the configuration of the
specified R-VOL.
The specified R-VOL is not
recognizable from the
connection port.
88216005
4ECheck whether the volume is
in a usable condition. If the
volume is usable, call
technical support.
An I/O Error occurred on the
R-VOL, or the R-VOL is in an
unusable condition.
88226005
4iRefresh and confirm the
Continuous Access screen in
the MCU and RCU.
The Add Pair
(Paircreate)/Resume Pair
(Pairresync) operation failed
combining pairs (using Fibre
path and Serial path) is not
allowed in the same CT
Group.
88256005
XP Remote Web Console Error Codes 193