HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iThe add pair operation failed
because there are too many
RCUs in this CT group. If the
timer type is None, and then
4 RCU have already been
added. If the timer type is
Local or System, and then 1
RCU has already been
added. Check configuration
of CT group numbers already
used on both MCU and RCU.
Register a new CT group.
Too many RCUs in this CT
Group.
88036005
4iThe resume pair operation
failed. The volume and the
copy mode must be either
both asynchronous or both
synchronous. Verify that the
status of the volume and the
copy mode match, and then
retry the operation.
Copy mode cannot be
changed.
88046005
4iThe resume pair operation
failed, because there is no
R-VOL in the CT Group.
Verify the status of the CT
group in the MCU/RCU. If an
M-VOL exists, delete it and
retry the add pair operation.
CT Group is not active in the
RCU.
88056005
4iTo change the CT group
option (timer type or time
out), either delete all
asynchronous pairs in the
group, or verify the status of
the RCU CT Group option
and set the same option as
the MCU.
CT Group Option cannot be
changed unless deleting or
suspending all asynchronous
pairs in the group.
88066005
4iThe add pair operation failed
because there are too many
MCUs in this CT group. If the
timer type is System, and then
4 MCUs have already been
added. If the timer type is
local or none, and then 1
MCU has already been
added. Register a new CT
group.
Too many MCUs in this CT
Group.
88076005
4iThe add/resume pair
operation failed, because the
either the specified volume or
another volume in the same
group is being changed to
simplex or suspend status.
Retry the operation after the
status change is completed.
Retry Add Pair
(Paircreate)/Resume Pair
(Pairresync) operation in a
few minutes.
88086005
XP Remote Web Console Error Codes 191