HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iInstall XP Continuous Access
in the MCU and the RCU,
and then retry the operation.
The XP Continuous Access
function is not installed in the
specified controller(s.)
87936005
4iInstall XP Continuous Access
in the MCU and the RCU,
and then retry the operation.
The XP Continuous Access
function is not installed in the
specified controller(s.)
87946005
4iCheck the status of the
specified M-VOL from the
host or the SVP.
The M-VOL should be in the
Split pair (PSUS) status, if the
M-VOL is a Hitachi
ShadowImage for z/OS/XP
Business Copy T-VOL. The
M-VOL should not be a
reserved volume or in the
Hitachi ShadowImage for
z/OS/XP Business Copy
Reverse Copy status.
87956005
4iCheck the status of the
specified R-VOL from the host
or the SVP.
The R-VOL should not be a
Hitachi ShadowImage for
z/OS/XP Business
Copy/FlashCopy Mirror
T-VOL, a reserved volume,
nor in the Hitachi
ShadowImage for z/OS/XP
Business Copy/FlashCopy
Mirror Reverse Copy status.
87966005
4iCheck the status of the
specified M-VOL from the
host or the SVP.
The M-VOL should be the
Hitachi ShadowImage for
z/OS/XP Business
Copy/FlashCopy Mirror
T-VOL of the pair established,
with one S-VOL to one T-VOL.
87976005
4iThe Add Pair operation failed
because the MCU is already
being used for XP Business
Copy/XP FlashCopy Mirror.
Verify the status of the MCU
and retry the operation.
The MCU is already used for
Hitachi ShadowImage for
z/OS/XP Business
Copy/FlashCopy Mirror.
87986005
4EVerify the status of the
specified M-VOL.
The M-VOL is already in use
for XP Auto LUN.
87996005
4EVerify the status of the
specified R-VOL.
The R-VOL is already in use
for XP Auto LUN.
88006005
4iVerify the status of the
specified R-VOL. If the device
is not reserved, retry the
operation.
The R-VOL is reserved, or the
RCU or the path between
MCU-RCU is in a heavy load
condition.
88016005
4EThe add pair operation failed
because the CT Group is not
active. Add the CT group,
and then retry the operation.
CT group is not active.88026005
190 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes