HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EThe specified volume does
not exist. (You have specified
wrong CU#:LDEV#) or the
LDEV (exclusively for
mainframe) cannot be
processed in this agent. The
error does not occur normally
because it is guarded in the
screen. Contact the program
maker.
An error occurred. If this
problem persists, call
technical support.
10210003
2EHost mode is invalid. (The
specified value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10220003
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists, call
technical support.
10230003
2EFibre topology information is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10240003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The specified LU path does
not exist.
10250003
2EThe specified value of the
command device setting is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
The specified value of the
command device setting is
invalid. Check the setting.
10270003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10280003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10290003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10300003
XP Remote Web Console Error Codes 19