HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iSelect another volume.A volume cannot be used as
an R-VOL when:
• it is used by Hitachi
Extended Remote Copy
for Mainframe.
• it is used by PPRC or XP
Continuous Access.
• it is used by Concurrent
Copy.
• it is in a reserved
condition.
• it is used by XP
Continuous Access Journal
or Hitachi Universal
Replicator for z/OS.
• it is used by Hitachi
ShadowImage for z/OS
or XP FlashCopy Mirror.
87456005
4iSee the INSTALLATION
SECTION and
OPENPLATFORM SECTION
in the maintenance manual
to confirm whether the device
emulation type of the M-VOL
is supported by XP
Continuous Access (via serial
interface.)
The device emulation type of
the M-VOL is not supported
by XP Continuous Access or
XP Continuous Access via
serial interface.
87466005
4iThe version of the microcode
on the storage system does
not support the specified
function or operation. Call
technical support.
Current microcode version
does not support the specified
operation.
87476005
4iData migration cannot start
because the volume is online.
Vary the path offline and
retry.
Specified M-VOL may be in
use by HOST.
87486005
4iCheck if the input number of
R-VOL is correct. If not, enter
the correct R-VOL number. If
the number is correct, vary
the specified path offline.
Specified R-VOL is still online
from HOST.
87496005
4iThe RCU controller emulation
type does not support data
migration. Call technical
support.
Data Migration is not
supported under the MCU
Controller emulation type.
87506005
4iAdd Pair operation failed.
1. Confirm the controller
emulation type, and see
the manual.
2. Confirm the CT Group
number in the MCU.
XP Continuous Access is not
supported under the RCU
Controller emulation type, or
the CT Group is not usable.
87516005
XP Remote Web Console Error Codes 185