HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 48 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iA parameter specified by the
data migration operation is
invalid. (For example, the
R-VOL that is specified may
already be in use as the
R-VOL of another pair.)
Check the status of the
volumes and retry the
operation.
Parameter specified by Data
Migration operation is
invalid.
87076005
4iCheck the pair status for XP
Continuous Access. If the
requested R-VOL is in a
permissible status, retry the
operation.
The pair status of the R-VOL
is not valid.
87086005
4EAll channel adapters are not
active for XP Continuous
Access. Call technical
support.
XP Continuous Access
operation was rejected.
87096005
4iThe pair status does not
permit this operation. Verify
the pair status, and if the
operation is permitted retry.
The pair status of the
specified volume is not valid.
87106005
4iCheck the port number, GID,
and LUN of the RCU.
Parameter specified by XP
Continuous Access operation
for expansion volume is not
valid.
87116005
4E1. If this was a path
operation retry after the
problem has been fixed.
2. If this was a pair
operation, retry after the
paths have been
recovered. Two means of
recovering paths are as
follow:
a. Execute ESTPATH from
the host console, or
b. First delete the path(s)
from the SVP, and then
re-add them.
The operation was rejected
due to a FREEZE state.
87126005
4EThe port type could not be
changed because the port
group was set in the specified
package. Delete the group
setting, and then change the
port type.
The port group already exists
on the specified port.
87136005
4ECall technical support.An internal error occurred.87146005
4EThe specified number of
paths is not within the
acceptable path range of 0
to 4. Verify the number of
paths and retry the operation.
Invalid number of paths.87156005
XP Remote Web Console Error Codes 181