HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
10090003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10100003
2EThe volume which links as an
expanded LU extend over
CU#. The error does not
occur normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10110003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
LU path is set to a volume
which links as an expanded
LU.
10120003
2EThe emulation type of a
volume which links as an
expanded LU is not the same.
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
10130003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU and
path at the same time.)
10150003
2EThe specified port does not
exist. You have specified a
wrong port number. Or the
specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10180003
2ELUN is invalid. (The specified
value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10200003
18 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes