HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 47 Error Codes — Part Code 5310 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Are you sure you want to
delete the WWN?
90775310
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Are you sure you want to
delete the Performance
Control group?
90785310
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
The Performance Control
group is deleted because no
WWN is registered on the
Performance Control group.
90795310
5WThe control status will change
to Port Control. Select [OK].
The control status will change
to Port Control.
93125310
5WThe control status will change
to WWN Control. Select
[OK].
The control status will change
to WWN Control.
93135310
5WSet up a maximum value to
control.
There is no control, because
the upper value is 0 in all
ports.
93145310
5iTurn on the monitoring switch
to display the monitoring
data in real time.
The monitoring switch is
turned OFF. If you use the
real time option for the first
time, turn ON the monitoring
switch.
93155310
5WContinue work, when you
may change in the state
where it does not control.
The control status will change
to No Control.
93265310
5NTo clear settings on removed
ports, check the Delete ports
if CHIP is removed check
box, and then select the
Apply button.
Settings on removed ports still
remain. To clear the settings,
check the Delete ports if CHIP
board is removed check box
and then select the Apply
button.
93285310
5WIf you select OK on the next
window, the settings on port
control will be initialized. To
quit the operation, select
Cancel on the next window.
To continue initialization,
select OK on the next
window. To quit the
operation, select Cancel on
the next window.
93295310
5WIf you select OK on the next
window, the settings on
WWN control will be
initialized. To quit the
operation, select Cancel on
the next window.
To continue initialization,
select OK on the next
window. To quit the
operation, select Cancel on
the next window.
93305310
5WCorrect the specified
contents, and request the
setting of the configuration
information again.
The specified WWN is
already in use.
93315310
5ISelect Yes to change the
control status.
Do you want to change the
control status to Port Control?
93335310
5ISelect Yes to change the
control status.
Do you want to change the
control status to WWN
Control?
93345310
178 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes