HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 43 Error Codes — Part Code 5205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
50135205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
50995205
6WInstall the required program
product.
This functionality is not
available because XP Auto
LUN is not installed.
52035205
6ERelease the Data Migration.The volume(s) is already
being used by Data
Migration.
55045205
6ERelease the XP Continuous
Access Pair.
The volume(s) is already
being used by XP Continuous
Access.
55055205
6ERelease the XP Continuous
Access Pair.
The volume(s) is already
being used by XP Continuous
Access whose status is not
Suspend.
55065205
6ETry again.The specified volume is not
defined as the target volume
of XP Auto LUN.
55075205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60005205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60015205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60125205
2EAn error occurred. If this
problem persists, call
technical support.
If this problem persists despite
retrying, call technical
support.
60225205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60235205
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60365205
5iChange the monitor switch to
ON, and accumulate the
data.
There is no monitoring data.65015205
XP Remote Web Console Error Codes 163