HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 36 Error Codes — Part Code 3210
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the specified content,
and retry the operation.
The specified V-VOL group
cannot be deleted.
A V-VOL group cannot be
deleted when it contains:
• a path defined volume,
• a LUSE volume.
550013210
5WCheck the settings, and retry
the operation.
The setting of V-VOL group is
incorrect.
551013210
5WCheck the specified content,
and retry the operation.
V-VOL cannot be configured
because the specified value
is invalid.
It cannot be configured when
one of the following errors
occur:
• The setting capacity of the
V-VOL is outside the
range.
• The number of created
V-VOLs is outside the
range.
• The number of V-VOLs
exceeds the maximum
number of V-VOLs that can
be created in the whole
subsystem.
• The specified capacity
exceeds the remaining
capacity.
552013210
5WCheck the settings, and retry
the operation.
There are V-VOLs whose
CU:LDEV numbers are not
set.
553013210
5WCheck the specified content,
and retry the operation.
The selected CU:LDEV
number has already been
used.
553023210
5WCheck the specified content,
and retry the operation.
The CU:LDEV number is
outside the valid range.
553033210
5WCheck the specified content,
and retry the operation.
The SSID setting is incorrect.554013210
5WCheck the specified content,
and retry the operation.
There are boundaries that do
not have SSID.
554023210
5iTo continue processing, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
delete the selected V-VOL
group?
590013210
5iTo continue processing, select
[OK]. Otherwise, select
[Cancel].
The V-VOL group information
is to be set with free setting.
592013210
5iTo continue processing, select
[OK]. Otherwise, select
[Cancel].
Are you sure you want to
register with the following
contents?
595013210
XP Remote Web Console Error Codes 147