HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 33 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5iSelect [OK] to continue Write
to Control Blocks processing,
or select [Cancel] to stop the
processing.
Use this function only for zero
formatted volumes. Do you
want to continue this
operation?
591183010
5WSelect [OK] to cancel the
specified item and acquire
progress. Select [Cancel] to
stop the processing.
The specified item will be
canceled. Do you want to
continue?
593333010
5iSelect [OK].The format processing
completed.
593343010
Table 34 Error Codes — Part Code 3110
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the specified content,
and retry the operation.
Pool-VOLs are not registered
to the newly created pool.
555013110
5WCheck the specified content,
and retry the operation.
The Pool ID setting is
incorrect.
555023110
5WCheck the specified content,
and retry the operation.
The specified Pool ID already
exists.
555033110
5WCheck the specified content,
and retry the operation.
The Pool-VOL cannot be
registered to the Pool,
because the CLPR number of
the Pool-VOL is different from
the number of the volumes
already registered to the
Pool.
555043110
5iSelect [OK] to continue
processing, or select [Cancel]
to stop processing.
It will be added to the
Pool-VOL table with the
specified contents. Do you
want to continue?
596013110
5iSelect [OK] to continue
processing, or select [Cancel]
to stop processing.
Are you sure you want to
delete the Pool?
596023110
5iSelect [OK] to continue
processing, or select [Cancel]
to stop processing.
Are you sure you want to
release the blockade of the
Pool?
596033110
XP Remote Web Console Error Codes 141