HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 33 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WReduce the number of
V-VOLs, and then retry the
operation.
No more V-VOLs can be set,
because the number of
V-VOLs exceeds the maximum
number that can be set to the
whole subsystem.
555883010
5WApply the Install CV setting,
and then retry the Install CV
setting.
Only up to 16,384 LDEVs
can be set when you apply
the Install CV setting once.
You can only set another %s
LDEVs because the number of
LDEVs that can be set in a
VDEV is more than the
number of LDEVs that can be
set by Install CV setting one
time.
555953010
5WSelect [OK].Neither the format processing
nor the shredding processing
is executed.
556353010
0WRequest technical support to
execute the interrupted
processing and complete it
successfully from the SVP.
The processing for adding or
deleting LDEV remains
interrupted. Call technical
support and request to
execute the interrupted
processing and end the
processing normally from the
SVP.
556373010
5WRetry the shredding
operation.
If this problem persists, call
technical support.
Failed to create the shredding
result file in the previous
shredding operation. Retry
the shredding operation.
556433010
0iConfirm whether the external
volume is zero formatted
when an error occurs in
Write to Control Blocks
processing. Execute zero
format processing when the
external volume is not zero
formatted.
Retry the operation if the
error occurred in the format
processing. If this problem
persists, call technical
support.
An error occurred in format
processing or in Write to
Control Blocks processing.
582093010
0iTo change the status, select
[OK]. If not, select [Cancel].
Are you sure you want to
change the status of the
specified volumes?
(To select a LUSE volume,
select the top LDEV.)
590233010
0iTo format the volume, select
[OK]. If not, select [Cancel].
The specified volume will be
formatted. Are you sure you
want to continue?
(To select a LUSE volume,
select the top LDEV.)
590243010
140 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes