HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 33 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
There is no volume to recover
in the specified parity group
(PG.) The CVs will be deleted
from the PG. Is it OK?
90193010
0iSelect [YES] for continuing
processing. Select [NO] if
you want to stop.
Do you want to cancel
making the following custom
volume operation?
90603010
0iTo execute the operation in
Preset, press the OK button.
Do you want to apply?91023010
0iDo you want to change?91033010
0iSpecify the SSID.91503010
0iSee the Confirmation Panel
for Completion of the
Shredding Operation of XP
LUN Configuration and
Security Manager.
Shredding has completed.93713010
0WSelect OK.The MakeVolume operation
will be performed while the
number of volumes in the
parity group is zero.
550263010
0WSelect OK.There is a volume that has not
been divided into volumes of
the same size. ( - %d [Block])
550303010
0WSelect OK.There is a volume that is
slightly smaller than the user
size that you specified. ( - %d
[Block])
550313010
0WSpecify a smaller size, and
then retry the operation.
You cannot create a volume
of the specified user size due
to insufficient free space.
550323010
0WSelect OK.There is no specifiable LDEV
number. Probable causes and
solutions are:
• The CU number that can
be specified for the started
SLPR is not assigned.
Contact the storage
administrator.
• All LDEVs in the usable
CU are already used.
• Check whether the LDEVs
are used by another SLPR.
Alternatively, contact the
storage administrator.
550333010
0WCheck the settings and retry
the operation.
There are no volumes that
can be initialized.
552053010
XP Remote Web Console Error Codes 139