HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 33 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the content of the
operation.
Execute one of the following
before deleting the LDEV:
However, LDEV cannot be
deleted for the Remote
Command Device.
• delete paths associated
with the LDEV.
• release the LUSE volume.
• release the reserved
volume of XP Auto LUN.
• remove Volume Security
settings from the volume.
• set access attribute of the
LDEV to Read/Write
• remove Pool settings from
the volume.
• remove JNL settings from
the volume.
• remove Extent settings
from the volume.
50543010
5WCheck the content of the
operation.
There is no volume to be
initialized.
A volume cannot be
initialized when it is:
• Defined with a path or
paths,
• Used as a LUSE volume,
• Reserved for XP Auto LUN,
• Paired with another
volume,
• Set as a command device,
• Used for Volume Security,
or
• Not read/write-enabled,
or
• Used as a Pool volume,
• Used as a JNL volume,
• Used as a Remote
Command Device volume,
• Used as an Extent Device
volume.
50553010
5WCheck the content of the
operation.
Select LDEVs after canceling
the automatically selected
LDEVs.
50563010
5WCheck the content of the
operation.
There are not enough LDEVs.50573010
XP Remote Web Console Error Codes 137