HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 32 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
An error occurred when
setting the Pool. Confirm the
error message of the logical
volume(s) set as a Pool-VOL
of the Pool.
6ECheck the amount of free
space in Pool management
block in the Pool window.
Install additional shared
memory if the free space is
insufficient.
Call technical support if the
capacity of shared memory
is not insufficient.
The capacity of shared
memory is insufficient or an
error occurred during SVP
processing.
584743005
6EInstall the PCB for fiber port
or iSCSI port and retry the
operation.
The PCB for fibre port or
iSCSI port is not installed.
584753005
3EIf this problem persists, call
technical support.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
584913005
6EDelete the XP Snapshot
pair(s), and then retry the
operation.
V-VOL management area is
being used.
Delete the XP Snapshot
pair(s), and then retry the
operation.
585703005
6ECheck the Pool-VOL setting.The specified operation
cannot be executed because
the Pool-VOL is not mounted.
585713005
6EIf this problem persists, call
technical support.
An error occurred during the
communication with the
subsystem. Wait for a while,
and retry the operation.
If the error occurred in the
operation of the pool,
initialize the V-VOL
management area, refresh
the configuration by selecting
[All Refresh], and then retry
the operation.
585723005
3ECheck the DKCMAIN
microcode version and the
SVP microcode version
because these versions might
be mismatched.
This function is not supported.585733005
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585743005
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585753005
XP Remote Web Console Error Codes 135