HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 32 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ETo continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
565253005
3ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565263005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
571013005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
571023005
6EInstall the logical volume.The logical volume cannot be
registered, because it is not
installed.
584603005
6ERestore the blockade status
of the logical volume.
The specified operation
cannot be done, because the
logical volume is blocked.
584613005
6ESpecify another logical
volume.
The logical volume cannot be
registered, because it is
defined as a Pool-VOL.
584623005
6EMatch the CLPR number of
the logical volumes.
The specified logical volume
cannot be registered,
because the CLPR number of
the volume does not match
the number of the logical
volume already registered to
the Pool.
584633005
6ESpecify another logical
volume.
The specified logical volume
cannot be registered,
because it is a V-VOL.
584643005
6ESpecify another logical
volume.
The volume set as a
Command Device cannot be
set as a component of a
Pool-VOL.
584653005
6ESpecify another logical
volume.
The specified logical volume
cannot be registered,
because an SCSI path is set
to the logical volume.
584663005
6EThe current licensed capacity
is insufficient. Purchase a new
license key to increase the
licensed capacity.
The specified volume cannot
be set as a Pool-VOL,
because it exceeds the
licensed capacity.
584673005
132 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes