HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 31 Error Codes — Part Code 2010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WTo continue processing, select
[OK]. To stop processing,
select [Cancel].
You are trying to combine
volumes having different SLPR
numbers into a LUSE volume.
If you perform this operation,
the storage partition
administrator will become
unable to operate. Do you
want to continue?
550342010
5WDelete the path set to the
LUSE volume, and then retry
the operation.
The LUSE volume
configuration cannot be
released because a path is
set to the LUSE volume.
Delete the path, and then
release the LUSE volume
configuration.
551122010
Table 32 Error Codes — Part Code 3005
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6WCheck the status of the disk
storage system. If the volume
is not blocked, call technical
support.
Some of volumes may be
blocked, or there may be a
module in a status that
requires maintenance (for
example, a module is
blocked, the shared memory
is inconsistent, or some other
factor.) Check the status of
the volumes. If the volumes
are not blocked, call
technical support.
20113005
6WReset the configuration
definition of XP Continuous
Access, XP Business Copy,
Hitachi ShadowImage for
z/OS, XP Auto LUN, XP
FlashCopy Mirror, XP
Snapshot, or XP Flex Copy
has been defined, and then
retry the operation.
The configuration of XP
Continuous Access, XP
Business Copy, Hitachi
ShadowImage for z/OS, XP
Auto LUN, XP FlashCopy
Mirror, XP Snapshot, or XP
Flex Copy has been defined.
Reset the configuration
definition, and then retry the
operation.
20863005
128 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes