HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 28 Error Codes — Part Code 1110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the settings, and then
retry the operation.
The specified Target name is
incorrect. If the type of the
Target name is eui, specify
the name in 20 characters.
The characters can be any
combinations of the
following, starting with eui.:
• numerals (0-9)
• letters from A to F, a to f
If the type of the Target name
is iqn, specify the name
within 223 characters.
The characters can be any
combinations of the
following:
• numerals (0-9)
• letters from A to Z, a to z
• dots (.)
• hyphens (-)
• colons (:)
555451110
5WCorrect the settings, and then
retry the operation.
The specified Target alias is
incorrect.
Specify the Target alias
within 32 characters.
The characters can be any
combinations of the
following:
• numerals (0-9)
• letters from A to Z, a to z
• dots (.)
• hyphens (-)
• colons (:)
555461110
5WSelect [OK].The specified Target alias is
already being used.
555471110
5WFollow the correct operation
procedure.
You cannot drop the host on
to an iSCSI Target.
555901110
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
The specified iSCSI Target
will be deleted. Do you want
to continue?
593081110
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
When an iSCSI Target name
or an iSCSI Target alias is
changed, the setting of the
host needs to be changed.
Do you want to change the
iSCSI Target name or the
iSCSI Target alias?
593091110
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Are you sure you want to
clear the selected iSCSI
Target #00?
593181110
XP Remote Web Console Error Codes 123