HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 28 Error Codes — Part Code 1110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iThe specified Host Group will
be deleted. Do you want to
continue?
90601110
0iThe specified host will be
deleted. Do you want to
continue?
90611110
0iWarning: The LU path to the
LDEV will be released at
once. Do you want to
continue?
90631110
0iDo you want to remove the
WWN?
90641110
0iDo you want to remove all of
the WWNs from the WWN
group?
90651110
0iDo you want to release the
LUN from the group?
90661110
0iDo you want to release the
LUN group?
90671110
0iDo you want to remove the
LUN group with all of the
LUNs in the group?
90681110
0iThe specified Command
Device LUN will release
Command Device security.
Do you want to continue?
90691110
5iTo continue processing, select
[Yes]. To stop processing,
select [No].
Are you sure to clear the
selected group #00?
90801110
0iThere are different security
settings in the group. Do you
want to re-configure?
91001110
0iTo execute the operation in
Preview, select [OK].
There are some WWN
groups or LUN groups that
don't have enough members.
Do you want to apply?
91011110
0iDo you want to renew the
security as group?
91021110
5WTurn on the security switch.The configuration will not
take effect until you turn on
the security switch.
550061110
5WiSCSI Target cannot be
registered.
The maximum number of
iSCSI Targets is already
registered.
555431110
5WCorrect the settings, and then
retry the operation.
The specified Target name is
already being used.
555441110
122 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes