HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 28 Error Codes — Part Code 1110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the operation contents.The corresponding port
cannot be changed because
the security switch is OFF.
50661110
5WCheck the operation contents.The corresponding port
cannot be changed because
the port is an initiator port.
50671110
5WEnter a correct value, and
retry.
The specified iSCSI name is
incorrect. If the type of the
iSCSI name is eui, specify 20
characters. The characters
can be any combinations of
the following:
• numerals (0-9)
• letters from A to F, a to f
If the type of the iSCSI name
is iqn, specify the iSCSI name
within 223 characters. The
characters can be any
combinations of the
following:
• numerals (0-9)
• letters from A to Z, a to z
• dots (.)
• hyphens (-)
• colons (:)
58241110
5WFollow the correct operation
procedure.
You cannot drop the host
onto a host group.
58251110
2ECall technical support.An error occurred in the client
logic.
70601110
0iAll the hosts connected to the
target port can access only
the LUNs defined in group
#00. Therefore, the file
system may become corrupt
while the LUNs defined in all
other groups are
inaccessible. Are you sure
you want to continue this
operation?
90101110
0iOnly the host registered in
the group can access the
LUNs defined to the group. If
the host is not registered in
the group, the host cannot
access any LUN. Are you
sure you want to continue this
operation?
90111110
0iThe Security switch of the port
toggled. Do you want to
continue?
90181110
XP Remote Web Console Error Codes 121