HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 27 Error Codes — Part Code 1010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WSelect [OK].The iSNS IP address or the
iSNS port number has been
changed. Delete iSNS
information and then select
[Apply].
593131010
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Do you want to register the
iSCSI port information in the
iSNS server?
593141010
5iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Do you want to delete the
iSCSI port information from
the iSNS server?
593151010
Table 28 Error Codes — Part Code 1110
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the specified
contents, and request the
setting of the configuration
information again.
The specified host is already
in use.
10641110
5WCorrect the specified
contents, and request the
setting of the configuration
information again.
The specified name is already
in use.
10651110
5WRemove the prohibited
characters from the
nickname.
You can not use the following
characters for the name:
\ / , : ; * " < > |
You cannot use spaces for the
first and the last characters in
the name.
11101110
5WEnter a correct value, and
retry.
The specified WWN is
invalid.
Specify the WWN with 16
characters, using any of the
following combinations:
• Numerals (0-9),
• Letters (A-F),
• Hyphen (-), or
• Space.
(You cannot specify 0 for all
the 16 characters.)
50001110
5WCorrect the specified content,
and retry.
The name should be input
using specified letters (a-z
and A-Y) and digits (0-9.)
50011110
5WCorrect the specified content,
and retry.
The Group Name should be
from 1 to 8 characters.
50201110
5WCorrect the specified content,
and retry.
The name should be from 1
to 8 characters.
50211110
XP Remote Web Console Error Codes 119